[Federal Register Volume 85, Number 200 (Thursday, October 15, 2020)]
[Notices]
[Pages 65354-65356]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-22799]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-580-906]
Common Alloy Aluminum Sheet From the Republic of Korea:
Preliminary Affirmative Determination of Sales at Less Than Fair Value,
Postponement of Final Determination, and Extension of Provisional
Measures
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) preliminarily determines
that common alloy aluminum sheet (aluminum sheet) from the Republic of
Korea (Korea) is being, or is likely to be, sold in the United States
at less than fair value (LTFV). The period of investigation (POI) is
January 1, 2019 through December 31, 2019. Interested parties are
invited to comment on this preliminary determination.
DATES: Applicable October 15, 2020.
FOR FURTHER INFORMATION CONTACT: Matthew Renkey, AD/CVD Operations,
Office V, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-2312.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce
published the notice of initiation of this investigation on April 7,
2020.\1\ On July 29, 2020, Commerce postponed the preliminary
determination of this investigation, and the revised deadline is now
October 6, 2020.\2\ For a complete description of the events that
followed the initiation of this investigation, see the Preliminary
Decision Memorandum.\3\ A list of topics included in the Preliminary
Decision Memorandum is included as Appendix II to this notice. The
Preliminary Decision Memorandum is a public document and is on file
electronically via Enforcement and Compliance's Antidumping and
Countervailing Duty Centralized Electronic Service System (ACCESS).
ACCESS is available to registered users at https://access.trade.gov. In
addition, a complete version of the Preliminary Decision Memorandum can
be accessed directly at http://enforcement.trade.gov/frn/. The signed
and the electronic versions of the Preliminary Decision Memorandum are
identical in content.
---------------------------------------------------------------------------
\1\ See Common Alloy Aluminum Sheet from Bahrain, Brazil,
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Republic
of Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain,
Taiwan and the Republic of Turkey: Initiation of Less-Than-Fair-
Value Investigations, 85 FR 19444 (April 7, 2020) (Initiation
Notice).
\2\ See Common Alloy Aluminum Sheet from Bahrain, Brazil,
Croatia, Egypt, Germany, Greece, India, Indonesia, Italy, Republic
of Korea, Oman, Romania, Serbia, Slovenia, South Africa, Spain,
Taiwan, and the Republic of Turkey: Postponement of Preliminary
Determinations in the Less-Than-Fair-Value Investigations, 85 FR
45576 (July 29, 2020).
\3\ See Memorandum, ``Decision Memorandum for the Preliminary
Determination in the Less-Than-Fair-Value Investigation of Common
Alloy Aluminum Sheet from the Republic of Korea,'' dated
concurrently with, and hereby adopted by, this notice (Preliminary
Decision Memorandum).
---------------------------------------------------------------------------
Scope of the Investigation
The product covered by this investigation is aluminum sheet from
Korea. For a complete description of the scope of this investigation,
see Appendix I.
Scope Comments
In accordance with the preamble to Commerce's regulations,\4\ the
Initiation Notice set aside a period of time for parties to raise
issues regarding product coverage (i.e., scope).\5\ Certain interested
parties commented on the scope of the investigation as it appeared in
the Initiation Notice. For a summary of the product coverage comments
and rebuttal responses submitted to the record for this investigation,
and accompanying discussion and analysis of all comments timely
received, see the Preliminary Scope Decision Memorandum.\6\ As
discussed in the Preliminary Scope Decision Memorandum, Commerce is
preliminarily modifying the scope language as it appeared in the
Initiation Notice. See the revised scope in Appendix I to this notice.
The deadlines to submit scope case briefs are established in the
Preliminary Scope Decision Memorandum. There will be no further
opportunity for comments on scope-related issues.\7\
---------------------------------------------------------------------------
\4\ See Antidumping Duties; Countervailing Duties, Final Rule,
62 FR 27296, 27323 (May 19, 1997).
\5\ See Initiation Notice, 85 FR at 19445.
\6\ See Memorandum, ``Common Alloy Aluminum Sheet from Bahrain,
Brazil, Croatia, Egypt, Germany, Greece, India, Indonesia, Italy,
Republic of Korea, Oman, Romania, Serbia, Slovenia, South Africa,
Spain, Taiwan, and the Republic of Turkey: Scope Comments Decision
Memorandum for the Preliminary Determinations,'' dated October, 6,
2020 (Preliminary Scope Decision Memorandum).
\7\ Case briefs, other written comments, and rebuttal briefs
submitted in response to this preliminary LTFV determination should
not include scope-related issues. See Preliminary Scope Decision
Memorandum at 4; see also ``Public Comment'' section of this notice.
---------------------------------------------------------------------------
Methodology
Commerce is conducting this investigation in accordance with
section 731 of the Act. Commerce has calculated export prices in
accordance with section 772(a) of the Act. Normal value (NV) is
calculated in accordance with section 773 of the Act. For a full
description of the methodology underlying the preliminary
determination, see the Preliminary Decision Memorandum.
All-Others Rate
Section 733(d)(1)(A)(ii) of the Act provides that in the
preliminary determination Commerce shall determine an estimated all-
others rate for all exporters and producers not individually examined.
Pursuant to section 735(c)(5)(A) of the Act, this rate shall be an
amount equal to the weighted average of the estimated weighted-average
dumping margins established for exporters and producers individually
investigated, excluding any zero and de minimis margins, and any
margins determined entirely under section 776 of the Act.
Commerce calculated an estimated weighted-average dumping margin
for Novelis Korea Limited and Ulsan Aluminum Limited (Novelis/Ulsan)
that is not zero, de minimis, or based entirely on facts otherwise
available.\8\ Accordingly, Commerce assigned the estimated weighted-
average dumping margin calculated for Novelis/Ulsan to all other
producers and exporters.\9\
---------------------------------------------------------------------------
\8\ See Memorandum, ``Antidumping Duty Investigation of Common
Alloy Aluminum Sheet from the Republic of Korea: Preliminary
Determination Margin Calculation for Novelis Korea Limited and Ulsan
Aluminum Limited,'' dated concurrently with, and hereby adopted by,
this notice.
\9\ On September 28, 2020, we determined that Novelis Korea
Limited and Ulsan Aluminum Limited are affiliated, pursuant to
section 771(33)(E) of the Act, and that they should be treated as a
single entity, Novelis/Ulsan, pursuant to 19 CFR 351.401(f). See
Memorandum, ``Antidumping Duty Investigation of Common Alloy
Aluminum Sheet from the Republic of Korea: Novelis Korea Limited and
Ulsan Aluminum Limited Preliminary Affiliation and Collapsing
Memorandum,'' dated September 28, 2020.
---------------------------------------------------------------------------
Preliminary Determination
Commerce preliminarily determines that the following estimated
weighted-average dumping margins exist:
[[Page 65355]]
------------------------------------------------------------------------
Estimated
weighted-
average
Exporter/producer dumping
margin
(percent)
------------------------------------------------------------------------
Novelis Korea Limited/Ulsan Aluminum Limited................ 5.04
All Others.................................................. 5.04
------------------------------------------------------------------------
Suspension of Liquidation
In accordance with section 733(d)(2) of the Act, Commerce will
direct U.S. Customs and Border Protection (CBP) to suspend liquidation
of entries of subject merchandise, as described in Appendix I, entered,
or withdrawn from warehouse, for consumption on or after the date of
publication of this notice in the Federal Register.
Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR
351.205(d), where appropriate, Commerce will instruct CBP to require a
cash deposit equal to the estimated weighted-average dumping margin or
the estimated all-others rate, as follows: (1) The cash deposit rate
for the respondent listed above will be equal to the company-specific
estimated weighted-average dumping margin determined in this
preliminary determination; (2) if the exporter is not a respondent
identified above, but the producer is, then the cash deposit rate will
be equal to the company-specific estimated weighted-average dumping
margin established for that producer of the subject merchandise; and
(3) the cash deposit rate for all other producers and exporters will be
equal to the all-others estimated weighted-average dumping margin.
These suspension of liquidation instructions will remain in effect
until further notice.
Disclosure
Commerce intends to disclose its calculations and analysis
performed to interested parties in this preliminary determination
within five days of any public announcement or, if there is no public
announcement, within five days of the date of publication of this
notice in accordance with 19 CFR 351.224(b).
Verification
Commerce is currently unable to conduct on-site verification of the
information relied upon in making its final determination in this
investigation. Accordingly, we intend to take additional steps in lieu
of on-site verification. Commerce will notify interested parties of any
additional documentation or information required.
Public Comment
Case briefs or other written comments on non-scope issues may be
submitted to the Assistant Secretary for Enforcement and Compliance.
Interested parties will be notified of the timeline for the submission
of such case briefs and written comments at a later date. Rebuttal
briefs, limited to issues raised in these case briefs, may be submitted
no later than seven days after the deadline date for case briefs.\10\
Note that Commerce has modified certain of its requirements for serving
documents containing business proprietary information until further
notice.\11\ Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who
submit case briefs or rebuttal briefs in this investigation are
encouraged to submit with each argument: (1) A statement of the issue;
(2) a brief summary of the argument; and (3) a table of authorities.
---------------------------------------------------------------------------
\10\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general
filing requirements).
\11\ See Temporary Rule Modifying AD/CVD Service Requirements
Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July
10, 2020).
---------------------------------------------------------------------------
Pursuant to 19 CFR 351.310(c), interested parties who wish to
request a hearing, limited to issues raised in the case and rebuttal
briefs, must submit a written request to the Assistant Secretary for
Enforcement and Compliance, U.S. Department of Commerce, within 30 days
after the date of publication of this notice. Requests should contain
the party's name, address, and telephone number, the number of
participants, whether any participant is a foreign national, and a list
of the issues to be discussed. If a request for a hearing is made,
Commerce intends to hold the hearing at a time and date to be
determined. Parties should confirm by telephone the date, time, and
location of the hearing two days before the scheduled date.
Postponement of Final Determination and Extension of Provisional
Measures
Section 735(a)(2) of the Act provides that a final determination
may be postponed until not later than 135 days after the date of the
publication of the preliminary determination if, in the event of an
affirmative preliminary determination, a request for such postponement
is made by exporters who account for a significant proportion of
exports of the subject merchandise, or in the event of a negative
preliminary determination, a request for such postponement is made by
the petitioner. Section 351.210(e)(2) of Commerce's regulations
requires that a request by exporters for postponement of the final
determination be accompanied by a request for extension of provisional
measures from a four-month period to a period not more than six months
in duration.
On September 18, 2020, pursuant to 19 CFR 351.210(e), Novelis/Ulsan
requested that Commerce postpone the final determination and that
provisional measures be extended to a period not to exceed six
months.\12\ In accordance with section 735(a)(2)(A) of the Act and 19
CFR 351.210(b)(2)(ii), because: (1) The preliminary determination is
affirmative; (2) the requesting exporters account for a significant
proportion of exports of the subject merchandise; and (3) no compelling
reasons for denial exist, Commerce is postponing the final
determination and extending the provisional measures from a four-month
period to a period not greater than six months. Accordingly, Commerce
will make its final determination no later than 135 days after the date
of publication of this preliminary determination, pursuant to section
735(a)(2) of the Act.
---------------------------------------------------------------------------
\12\ See Novelis/Ulsan's Letter, ``Common Alloy Aluminum Sheet
from Korea: Novelis Korea's Request for Postponement of Final
Antidumping Determination,'' dated September 18, 2020.
---------------------------------------------------------------------------
International Trade Commission Notification
In accordance with section 733(f) of the Act, Commerce will notify
the International Trade Commission (ITC) of its preliminary
determination. If the final determination is affirmative, then the ITC
will determine before the later of 120 days after the date of this
preliminary determination or 45 days after the final determination
whether imports of aluminum sheet from Korea are materially injuring,
or threaten material injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and published in accordance with
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
Dated: October 6, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The products covered by this investigation are common alloy
aluminum sheet, which is a flat-rolled aluminum product having a
thickness of 6.3 mm or less, but greater than 0.2 mm, in coils or
cut-to-length, regardless of width. Common alloy sheet within the
scope of this investigation includes both not clad aluminum sheet,
as well as multi-alloy, clad aluminum sheet. With respect to not
clad aluminum sheet, common alloy sheet is
[[Page 65356]]
manufactured from a 1XXX-, 3XXX-, or 5XXX-series alloy as designated
by the Aluminum Association. With respect to multi-alloy, clad
aluminum sheet, common alloy sheet is produced from a 3XXX-series
core, to which cladding layers are applied to either one or both
sides of the core. The use of a proprietary alloy or non-proprietary
alloy that is not specifically registered by the Aluminum
Association as a discrete 1XXX-, 3XXX-, or 5XXX-series alloy, but
that otherwise has a chemistry that is consistent with these
designations, does not remove an otherwise in-scope product from the
scope.
Common alloy sheet may be made to ASTM specification B209-14 but
can also be made to other specifications. Regardless of
specification, however, all common alloy sheet meeting the scope
description is included in the scope. Subject merchandise includes
common alloy sheet that has been further processed in a third
country, including but not limited to annealing, tempering,
painting, varnishing, trimming, cutting, punching, and/or slitting,
or any other processing that would not otherwise remove the
merchandise from the scope of this investigation if performed in the
country of manufacture of the common alloy sheet.
Excluded from the scope of this investigation is aluminum can
stock, which is suitable for use in the manufacture of aluminum
beverage cans, lids of such cans, or tabs used to open such cans.
Aluminum can stock is produced to gauges that range from 0.200 mm to
0.292 mm, and has an H-19, H-41, H-48, H-39, or H-391 temper. In
addition, aluminum can stock has a lubricant applied to the flat
surfaces of the can stock to facilitate its movement through
machines used in the manufacture of beverage cans. Aluminum can
stock is properly classified under Harmonized Tariff Schedule of the
United States (HTSUS) subheadings 7606.12.3045 and 7606.12.3055.
Where the nominal and actual measurements vary, a product is
within the scope if application of either the nominal or actual
measurement would place it within the scope based on the definitions
set for the above.
Common alloy sheet is currently classifiable under HTSUS
subheadings 7606.11.3060, 7606.11.6000, 7606.12.3096, 7606.12.6000,
7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Further,
merchandise that falls within the scope of this investigation may
also be entered into the United States under HTSUS subheadings
7606.11.3030, 7606.12.3015, 7606.12.3025, 7606.12.3035,
7606.12.3091, 7606.91.3055, 7606.91.6055, 7606.92.3025,
7606.92.6055, 7607.11.9090. Although the HTSUS subheadings are
provided for convenience and customs purposes, the written
description of the scope of this investigation is dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Scope of Investigation
V. Scope Comments
VI. Affiliation and Collapsing
VII. Discussion of the Methodology
VIII. Currency Conversion
IX. Recommendation
[FR Doc. 2020-22799 Filed 10-14-20; 8:45 am]
BILLING CODE 3510-DS-P