[Federal Register Volume 86, Number 27 (Thursday, February 11, 2021)]
[Notices]
[Pages 9051-9055]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-02824]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-133]
Certain Metal Lockers and Parts Thereof From the People's
Republic of China: Preliminary Affirmative Determination of Sales at
Less Than Fair Value, Postponement of Final Determination and Extension
of Provisional Measures
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) preliminarily determines
that certain metal lockers and parts thereof (metal lockers) from the
People's Republic of China (China) are being, or are likely to be, sold
in the United States at less than fair value (LTFV). The period of
investigation is January 1, 2020, through June 30, 2020. Interested
parties are invited to comment on this preliminary determination.
DATES: Applicable February 11, 2021.
FOR FURTHER INFORMATION CONTACT: Laurel LaCivita or Patrick Barton, AD/
CVD Operations, Office III, Enforcement and Compliance, International
Trade Administration, U.S. Department of Commerce, 1401 Constitution
Avenue NW, Washington, DC 20230; telephone: (202) 482-4243 or (202)
482-0012, respectively.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce
published the notice of initiation of this investigation on August 5,
2020.\1\ On December 1, 2020, Commerce postponed the preliminary
determination of this investigation, and the revised deadline is now
February 4, 2021.\2\ For a complete description of the events that
followed the initiation of this investigation, see the Preliminary
Decision Memorandum.\3\ A list of topics included in the Preliminary
Decision Memorandum is included as Appendix II to this notice. The
Preliminary Decision Memorandum is a public document and is on file
electronically via Enforcement and Compliance's Antidumping and
Countervailing Duty Centralized Electronic Service System (ACCESS).
ACCESS is available to registered users at https://access.trade.gov. In
addition, a complete version of the Preliminary Decision Memorandum can
be accessed directly at http://enforcement.trade.gov/frn/. The signed
and the electronic versions of the Preliminary Decision Memorandum are
identical in content.
---------------------------------------------------------------------------
\1\ See Certain Metal Lockers and Parts Thereof from the
People's Republic of China: Initiation of Less-Than-Fair-Value
Investigation, 85 FR 47343 (August 5, 2020) (Initiation Notice).
\2\ See Certain Metal Lockers and Parts Thereof from the
People's Republic of China: Postponement of Preliminary
Determination in the Less-Than-Fair-Value Investigation, 85 FR 77157
(December 1, 2020).
\3\ See Memorandum, ``Decision Memorandum for the Preliminary
Determination in the Less-Than-Fair-Value Investigation of Certain
Metal Lockers and Parts Thereof from the People's Republic of
China,'' dated concurrently with this notice (Preliminary Decision
Memorandum).
---------------------------------------------------------------------------
Scope of the Investigation
The products covered by this investigation are metal lockers from
China. For a complete description of the scope of this investigation,
see Appendix I.
[[Page 9052]]
Scope Comments
In accordance with the preamble to Commerce's regulations,\4\ the
Initiation Notice set aside a period of time for parties to raise
issues regarding product coverage (scope).\5\ Certain interested
parties provided comments on the scope of the investigation, as it
appeared in the Initiation Notice. For a summary of all scope related
comments submitted to the record for this investigation and
accompanying discussion and analysis of all comments timely received,
see the Preliminary Scope Decision Memorandum.\6\ Commerce is
preliminarily modifying the scope language as it appeared in the
Initiation Notice. See the revised scope in Appendix I to this notice.
---------------------------------------------------------------------------
\4\ See Antidumping Duties; Countervailing Duties, Final Rule,
62 FR 27296, 27323 (May 19, 1997).
\5\ See Initiation Notice, 85 FR at 47344.
\6\ See Memorandum, ``Antidumping Duty and Countervailing Duty
Investigations of Certain Metal Lockers and Parts Thereof from the
People's Republic of China: Preliminary Scope Decision Memorandum,''
dated February 2, 2021 (Preliminary Scope Decision Memorandum).
---------------------------------------------------------------------------
Methodology
Commerce is conducting this investigation in accordance with
section 731 of the Act. Commerce has calculated export prices in
accordance with section 772(a) of the Act. Because China is a non-
market economy, within the meaning of section 771(18) of the Act,
Commerce has calculated normal value in accordance with section 773(c)
of the Act. In addition, pursuant to section 776(a) and (b) of the Act,
Commerce preliminarily has relied upon facts otherwise available, with
adverse inferences, for the China-wide entity. For a full description
of the methodology underlying Commerce's preliminary determination, see
the Preliminary Decision Memorandum.
Combination Rates
In the Initiation Notice,\7\ Commerce stated that it would
calculate producer/exporter combination rates for the respondents that
are eligible for a separate rate in this investigation. Policy Bulletin
05.1 describes this practice.\8\ In this investigation, we calculated
producer/exporter combination rates for respondents eligible for
separate rates.
---------------------------------------------------------------------------
\7\ See Initiation Notice, 85 FR at 47346-47347.
\8\ See Enforcement and Compliance's Policy Bulletin No. 05.1,
regarding, ``Separate-Rates Practice and Application of Combination
Rates in Antidumping Investigations involving Non-Market Economy
Countries,'' (April 5, 2005) (Policy Bulletin 05.1), available on
Commerce's website at http://enforcement.trade.gov/policy/bull05-1.pdf.
---------------------------------------------------------------------------
Preliminary Determination
Commerce preliminarily determines that the following estimated
weighted-average dumping margins exist:
----------------------------------------------------------------------------------------------------------------
Estimated Cash deposit rate
weighted-average (adjusted for
Exporter Producer dumping margin subsidy offsets)
(percent) (percent)
----------------------------------------------------------------------------------------------------------------
Hangzhou Xline Machinery & Equipment Co., Hangzhou Jusheng Metal 46.58 36.04
Ltd. (Hangzhou Xline). Products Co., Ltd.
Zhejiang Xingyi Metal Products Co., Ltd./ Zhejiang Xingyi Metal 23.09 12.55
Xingyi Metalworking Technology (Zhejiang) Products Co., Ltd./Xingyi
Co., Ltd. Metalworking Technology
(Zhejiang) Co., Ltd.
Geelong Sales (Macao Commercial Offshore) Zhongshan Geelong 26.87 16.33
Limited (a.k.a. Geelong Sales (MCO) Manufacturing Co. Ltd.
Limited, Geelong Sales (Macao Commercial)
Limited, and Geelong Sales (MC) Limited).
Hangzhou Evernew Machinery & Equipment Zhejiang Yinghong Metalworks 26.87 16.33
Company Limited. Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd........... Shanghai Asi Building 26.87 16.33
Materials Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd........... Luoyang Mingxiu Office 26.87 16.33
Furniture Co., Ltd.
Hangzhou Zhuoxu Trading Co., Ltd........... Luoyang Wandefu Import and 26.87 16.33
Export Trading Co. Ltd.
Hangzhou Zhuoxu Trading Co., Ltd........... Zhejiang Xingyi Metal 26.87 16.33
Products Co., Ltd.
Jiaxing Haihong Mechanical and Electrical Zhejiang Steelrix Office 26.87 16.33
Technology Co. Ltd. Furniture Co., Ltd.
Kunshan Dongchu Precision Machinery Co., Kunshan Dongchu Precision 26.87 16.33
Ltd. Machinery Co., Ltd.
Luoyang Hynow Import and Export Co., Ltd... Luoyang Jiudu Golden Cabinet 26.87 16.33
Co., Ltd.
Luoyang Shidiu Import and Export Co., Ltd.. Luoyang Yuabo Office 26.87 16.33
Machinery Co., Ltd..
Luoyang Steelart Office Furniture Co., Ltd. Luoyang Yongwei Office 26.87 16.33
Furniture Co., Ltd.
Luoyang Steelart Office Furniture Co., Ltd. Luoyang Zhuofan Steel Product 26.87 16.33
Factory.
Luoyang Steelart Office Furniture Co., Ltd. Luoyang Flyer Office 26.87 16.33
Furniture Co., Ltd.
Pinghu Chenda Storage Office Co., Ltd...... Pinghu Chenda Storage Office 26.87 16.33
Co., Ltd. (Pinghu Chenda).
Tianjin Jia Mei Metal Furniture Ltd........ Tianjin Jia Mei Metal 26.87 16.33
Furniture Ltd. (Tianjin Jia
Mei).
China-wide Entity.......................... ............................. 322.25 311.71
----------------------------------------------------------------------------------------------------------------
Suspension of Liquidation
In accordance with section 733(d)(2) of the Act, Commerce will
direct U.S. Customs and Border Protection (CBP) to suspend liquidation
of subject merchandise as described in the scope of the investigation
section entered, or withdrawn from warehouse, for consumption on or
after the date of publication of this notice in the Federal Register,
as discussed below. Further, pursuant to section 733(d)(1)(B) of the
Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash
deposit equal to the weighted average amount by which normal value
exceeds U.S. price, as indicated in the chart above as follows: (1) For
the producer/exporter combinations listed in the table above, the cash
deposit rate is equal to the estimated weighted-average dumping margin
listed for that combination in the table; (2) for all combinations of
Chinese producers/exporters of subject merchandise that have not
established eligibility for their own separate rates, the cash deposit
rate will be equal to the estimated weighted-average dumping margin
established for the China-wide entity; and (3) for all
[[Page 9053]]
third-county exporters of subject merchandise not listed in the table
above, the cash deposit rate is the cash deposit rate applicable to the
Chinese producer/exporter combination (or the China-wide entity) that
supplied that third-country exporter.
To determine the cash deposit rate, Commerce normally adjusts the
estimated weighted-average dumping margin by the amount of domestic
subsidy pass-through and export subsidies determined in a companion CVD
proceeding when CVD provisional measures are in effect. Accordingly,
where Commerce has made a preliminary affirmative determination for
domestic subsidy pass-through or export subsidies, Commerce has offset
the calculated estimated weighted-average dumping margin by the
appropriate rate(s). Any such adjusted rates may be found in the chart
of estimated weighted-average dumping margins in the ``Preliminary
Determination'' section.
Should provisional measures in the companion CVD investigation
expire prior to the expiration of provisional measures in this LTFV
investigation, Commerce will direct CBP to begin collecting cash
deposits at a rate equal to the estimated weighted-average dumping
margins calculated in this preliminary determination unadjusted for the
passed-through domestic subsidies or for export subsidies at the time
the CVD provisional measures expire.
These suspension of liquidation instructions will remain in effect
until further notice.
Disclosure
Commerce intends to disclose to interested parties the calculations
performed in connection with this preliminary determination within five
days of its public announcement or, if there is no public announcement,
within five days of the date of publication of this notice in
accordance with 19 CFR 351.224(b).
Verification
As provided in section 782(i)(1) of the Act, Commerce intends to
verify the information relied upon in making its final determination.
Normally, Commerce verifies information using standard procedures,
including an on-site examination of original accounting, financial, and
sales documentation. However, due to current travel restrictions in
response to the global COVID-19 pandemic, Commerce is unable to conduct
on-site verification in this investigation. Accordingly, we intend to
verify the information relied upon in making the final determination
through alternative means in lieu of an on-site verification.
Public Comment
Case briefs or other written comments may be submitted to the
Assistant Secretary for Enforcement and Compliance. Commerce will
notify interested parties of the timeline for the submission of case
briefs and written comments at a later date. Rebuttal briefs, limited
to issues raised in case briefs, may be submitted no later than seven
days after the deadline date for case briefs.\9\ Note that Commerce has
temporarily modified certain of its requirements for serving documents
containing business proprietary information, until further notice.\10\
Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case
briefs or rebuttal briefs in this investigation are encouraged to
submit with each argument: (1) A statement of the issue; (2) a brief
summary of the argument; and (3) a table of authorities.
---------------------------------------------------------------------------
\9\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general
filing requirements); Temporary Rule Modifying AD/CVD Service
Requirements Due to COVID-19, 85 FR 17006 (March 26, 2020), and
Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-
19; Extension of Effective Period, 85 FR 41363 (July 10, 2020)
(collectively, Temporary Rule).
\10\ See Temporary Rule.
---------------------------------------------------------------------------
Pursuant to 19 CFR 351.310(c), interested parties who wish to
request a hearing, limited to issues raised in the case and rebuttal
briefs, must submit a written request to the Assistant Secretary for
Enforcement and Compliance, U.S. Department of Commerce, within 30 days
after the date of publication of this notice. Requests should contain
the party's name, address, and telephone number, the number of
participants, whether any participant is a foreign national, and a list
of the issues to be discussed. If a request for a hearing is made,
Commerce intends to hold the hearing at a time and date to be
determined. Parties should confirm by telephone the date, time, and
location of the hearing two days before the scheduled date.
Postponement of Final Determination and Extension of Provisional
Measures
Section 735(a)(2) of the Act provides that a final determination
may be postponed until not later than 135 days after the date of the
publication of the preliminary determination if, in the event of an
affirmative preliminary determination, a request for such postponement
is made by exporters who account for a significant proportion of
exports of the subject merchandise, or in the event of a negative
preliminary determination, a request for such postponement is made by
the petitioners. Pursuant to 19 CFR 351.210(e)(2), Commerce requires
that requests by respondents for postponement of a final antidumping
determination be accompanied by a request for extension of provisional
measures from a four-month period to a period not more than six months
in duration.
On January 19, 2021, pursuant to 19 CFR 351.210(e), Zhejiang Xingyi
requested that Commerce postpone the final determination and that
provisional measures be extended to a period not to exceed six
months.\11\ On January 20, 2021, pursuant to 19 CFR 351.210(e),
Hangzhou Xline requested that Commerce postpone the final determination
and that provisional measures be extended to a period not to exceed six
months.\12\ In accordance with section 735(a)(2)(A) of the Act and 19
CFR 351.210(b)(2)(ii), because (1) the preliminary determination is
affirmative; (2) the requesting exporters account for a significant
proportion of exports of the subject merchandise; and (3) no compelling
reasons for denial exist, Commerce is postponing the final
determination and extending the provisional measures from a four-month
period to a period not greater than six months. Accordingly, Commerce's
final determination will publish no later than 135 days after the date
of publication of this preliminary determination.
---------------------------------------------------------------------------
\11\ See Zhejiang Xingyi's Letter, ``Certain Metal Lockers and
Parts Thereof from China, Case Nos. A-570-133: Request to Postpone
Final Determination,'' dated January 19, 2021.
\12\ See Hangzhou Xline's Letter, ``Metal Lockers and Parts
Thereof from the People's Republic of China: Request to Postpone the
Final Determination,'' dated January 20, 2021.
---------------------------------------------------------------------------
International Trade Commission Notification
In accordance with section 733(f) of the Act, Commerce will notify
the International Trade Commission (ITC) of its preliminary
determination of sales at LTFV. If the final determination is
affirmative, the ITC will determine before the later of 120 days after
the date of this preliminary determination or 45 days after the final
determination whether imports of the subject merchandise are materially
injuring, or threaten material injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and published in accordance with
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
[[Page 9054]]
Dated: February 4, 2021.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty
Operations.
Appendix I
Scope of the Investigation
The scope of the investigation covers certain metal lockers,
with or without doors, and parts thereof (metal lockers). The
subject metal lockers are secure metal storage devices less than 27
inches wide and less than 27 inches deep, whether floor standing,
installed onto a base or wall-mounted. In a multiple locker assembly
(whether a welded locker unit, otherwise assembled locker unit or
knocked down unit or kit), the width measurement shall be based on
the width of an individual locker not the overall unit dimensions.
All measurements in this scope are based on actual measurements
taken on the outside dimensions of the single-locker unit. The
height is the vertical measurement from the bottom to the top of the
unit. The width is the horizontal (side to side) measurement of the
front of the unit, and the front of the unit is the face with the
door or doors or the opening for internal access of the unit if
configured without a door. The depth is the measurement from the
front to the back of the unit. The subject certain metal lockers
typically include the bodies (back, side, shelf, top and bottom
panels), door frames with or without doors which can be integrated
into the sides or made separately, and doors.
The subject metal lockers typically are made of flat-rolled
metal, metal mesh and/or expanded metal, which includes but is not
limited to alloy or non-alloy steel (whether or not galvanized or
otherwise metallically coated for corrosion resistance), stainless
steel, or aluminum, but the doors may also include transparent
polycarbonate, Plexiglas or similar transparent material or any
combination thereof. Metal mesh refers to both wire mesh and
expanded metal mesh. Wire mesh is a wire product in which the
horizontal and transverse wires are welded at the cross-section in a
grid pattern. Expanded metal mesh is made by slitting and stretching
metal sheets to make a screen of diamond or other shaped openings.
Where the product has doors, the doors are typically configured
with or for a handle or other device or other means that permit the
use of a mechanical or electronic lock or locking mechanism,
including, but not limited to: A combination lock, a padlock, a key
lock (including cylinder locks) lever or knob lock, electronic key
pad, or other electronic or wireless lock. The handle and locking
mechanism, if included, need not be integrated into one another. The
subject locker may or may not also enter with the lock or locking
device included or installed. The doors or body panels may also
include vents (including wire mesh or expanded metal mesh vents) or
perforations. The bodies, body components and doors are typically
powder coated, otherwise painted or epoxy coated or may be
unpainted. The subject merchandise includes metal lockers imported
either as welded or otherwise assembled units (ready for
installation or use) or as knocked down units or kits (requiring
assembly prior to installation or use).
The subject lockers may be shipped as individual or multiple
locker units preassembled, welded, or combined into banks or tiers
for ease of installation or as sets of component parts, bulk packed
(i.e., all backs in one package, crate, rack, carton or container
and sides in another package, crate, rack, carton or container) or
any combination thereof. The knocked down lockers are shipped
unassembled requiring a supplier, contractor or end-user to assemble
the individual lockers and locker banks prior to installation.
The scope also includes all parts and components of lockers made
from flat-rolled metal or expanded metal (e.g., doors, frames,
shelves, tops, bottoms, backs, side panels, etc.) as well as
accessories that are attached to the lockers when installed
(including, but not limited to, slope tops, bases, expansion filler
panels, dividers, recess trim, decorative end panels, and end caps)
that may be imported together with lockers or other locker
components or on their own. The particular accessories listed for
illustrative purposes are defined as follows:
a. Slope tops: Slope tops are slanted metal panels or units that
fit on the tops of the lockers and that slope from back to front to
prevent the accumulation of dust and debris on top of the locker and
to discourage the use of the tops of lockers as storage areas. Slope
tops come in various configurations including, but not limited to,
unit slope tops (in place of flat tops), slope hoods made of a back,
top and end pieces which fit over multiple units and convert flat
tops to a sloping tops, and slope top kits that convert flat tops to
sloping tops and include tops, backs and ends.
b. Bases: Locker bases are panels made from flat-rolled metal
that either conceal the legs of the locker unit, or for lockers
without legs, provide a toe space in the front of the locker and
conceal the flanges for floor anchoring.
c. Expansion filler panel: Expansion filler panels or fillers
are metal panels that attach to locker units to cover columns, pipes
or other obstacles in a row of lockers or fill in gaps between the
locker and the wall. Fillers may also include metal panels that are
used on the sides or the top of the lockers to fill gaps.
d. Dividers: Dividers are metal panels that divide the space
within a locker unit into different storage areas.
e. Recess trim: Recess trim is a narrow metal trim that bridges
the gap between lockers and walls or soffits when lockers are
recessed into a wall.
f. Decorative end panels: End panels fit onto the exposed ends
of locker units to cover holes, bolts, nuts, screws and other
fasteners. They typically are painted to match the lockers.
g. End caps: End caps fit onto the exposed ends of locker units
to cover holes, bolts, nuts, screws and other fasteners.
The scope also includes all hardware for assembly and
installation of the lockers and locker banks that are imported with
or shipped, invoiced, or sold with the imported locker or locker
system except the lock.
Excluded from the scope are wire mesh lockers. Wire mesh lockers
are those with each of the following characteristics:
(1) At least three sides, including the door, made from wire
mesh;
(2) the width and depth each exceed 25 inches; and
(3) the height exceeds 90 inches.
Also excluded are lockers with bodies made entirely of plastic,
wood, or any nonmetallic material.
Also excluded are exchange lockers with multiple individual
locking doors mounted on one master locking door to access multiple
units. Excluded exchange lockers have multiple individual storage
spaces, typically arranged in tiers, with access doors for each of
the multiple individual storage space mounted on a single frame that
can be swung open to allow access to all of the individual storage
spaces at once. For example, uniform or garment exchange lockers are
designed for the distinct function of securely and hygienically
exchanging clean and soiled uniforms. Thus, excluded exchange
lockers are a multi-access point locker whereas covered lockers are
a single access point locker for personal storage. The excluded
exchange lockers include assembled exchange lockers and those that
enter in `knock down' form in which all of the parts and components
to assemble a completed exchange locker unit are packaged together.
Parts for exchange lockers that are imported separately from the
exchange lockers in `knock down' form are not excluded.
Also excluded are metal lockers that are imported with an
installed electronic, internet-enabled locking device that permits
communication or connection between the locker's locking device and
other internet connected devices.
Also excluded are locks and hardware and accessories for
assembly and installation of the lockers, locker banks and storage
systems that are separately imported in bulk and are not
incorporated into a locker, locker system or knocked down kit at the
time of importation. Such excluded hardware and accessories include
but are not limited to locks and bulk imported rivets, nuts, bolts,
hinges, door handles, door/frame latching components, and coat
hooks. Accessories of sheet metal, including but not limited to end
panels, bases, dividers and sloping tops, are not excluded
accessories.
Mobile tool chest attachments that meet the physical description
above are covered by the scope of the investigation, unless such
attachments are covered by the scope of the orders on certain tool
chests and cabinets from China. If the orders on certain tool chests
and cabinets from China are revoked, the mobile tool chest
attachments from China will be covered by the scope of the
investigation.
The scope also excludes metal safes with each of the following
characteristics: (1) Pry resistant, concealed hinges; (2) body walls
and doors of steel that are at least 17 gauge (0.05625 inch or
1.42874 mm thick); and (3) an integrated locking mechanism that
includes at least two round steel bolts 0.75 inch (19 mm) or larger
in diameter; or three bolts 0.70 inch (17.78 mm) or more in
[[Page 9055]]
diameter; or four or more bolts at least 0.60 inch (15.24 mm) or
more in diameter, that project from the door into the body or frame
of the safe when in the locked position.
The scope also excludes gun safes meeting each of the following
requirements:
(1) Shall be able to fully contain firearms and provide for
their secure storage.
(2) Shall have a locking system consisting of at minimum a
mechanical or electronic combination lock. The mechanical or
electronic combination lock utilized by the safe shall have at least
10,000 possible combinations consisting of a minimum three numbers,
letters, or symbols. The lock shall be protected by a casehardened
(Rc 60+) drill-resistant steel plate, or drill-resistant material of
equivalent strength.
(3) Boltwork shall consist of a minimum of three steel locking
bolts of at least \1/2\ inch thickness that intrude from the door of
the safe into the body of the safe or from the body of the safe into
the door of the safe, which are operated by a separate handle and
secured by the lock.
(4) The exterior walls shall be constructed of a minimum 12-
gauge thick steel for a single-walled safe, or the sum of the steel
walls shall add up to at least 0.100 inches for safes with walls
made from two pieces of flat-rolled steel.
(5) Doors shall be constructed of a minimum one layer of 7-gauge
steel plate reinforced construction or at least two layers of a
minimum 12-gauge steel compound construction.
(6) Door hinges shall be protected to prevent the removal of the
door. Protective features include, but are not limited to: hinges
not exposed to the outside, interlocking door designs, dead bars,
jeweler's lugs and active or inactive locking bolts.
The scope also excludes metal storage devices that (1) have two
or more exterior exposed drawers regardless of the height of the
unit, or (2) are no more than 30 inches tall and have at least one
exterior exposed drawer.
Also excluded from the scope are free standing metal cabinets
less than 30 inches tall with a single opening, single door and an
installed tabletop.
The scope also excludes metal storage devices less than 27
inches wide and deep that (1) have two doors hinged on the right and
left side of the door frame respectively covering a single opening
and that open from the middle toward the outer frame; or (2) are
free standing or wall-mounted, single-opening units 20 inches or
less high with a single door.
The subject certain metal lockers are classified under
Harmonized Tariff Schedule of the United States (HTSUS) subheading
9403.20.0078. Parts of subject certain metal lockers are classified
under HTS subheading 9403.90.8041. In addition, subject certain
metal lockers may also enter under HTS subheading 9403.20.0050.
While HTSUS subheadings are provided for convenience and Customs
purposes, the written description of the scope of the investigation
is dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Postponement of Final Determination and Extension of Provisional
Measures
V. Scope of Investigation
VI. Scope Comments
VII. Single Entity Analysis
VIII. Discussion of the Methodology
IX. Currency Conversion
X. Adjustment for Countervailable Export Subsidies
XI. Adjustment Under Section 777(A)(f) of the Act
XII. Recommendation
[FR Doc. 2021-02824 Filed 2-10-21; 8:45 am]
BILLING CODE 3510-DS-P